Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N4HG7 LS BK23593 - PA9T-GF35 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

市场与应用
汽车：燃油系统，冷却系统，进气系统(EGR)，汽车电子电气，传感器，泵，燃料电池
E＆E：连接器
消费品：家用电器，消费类电子产品

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
模塑收缩率, 平行	0.5 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.9 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	11500 / 11500	MPa	ISO 527
断裂应力	210 / 190	MPa	ISO 527
断裂伸长率	2.5 / 2.3	%	ISO 527
弯曲模量, 23°C	10500 / 10500	MPa	ISO 178
弯曲强度	290 / 265	MPa	ISO 178
无缺口简支梁冲击强度, +23°C	90 / 70	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	80 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	10 / 8	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	9 / -	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	300 / *	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	120 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	270 / *	°C	ISO 75-1/-2
线性热膨胀系数, 平行	17.5 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	56.5 / *	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	0.8 / *	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
相对介电常数., 100Hz	3.8 / 3.8	-	IEC 62631-2-1
介质损耗因子, 1MHz	130 / 195	E-4	IEC 62631-2-1
体积电阻率	1E16 / 1E14	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E14	Ohm	IEC 62631-3-2
相对漏电起痕指数	- / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	1.9 / *	%	类似ISO 62
吸湿性	0.8 / *	%	类似ISO 62
密度	1420 / -	kg/m³	ISO 1183
Bulk density	700	kg/m³	-

模塑测量的特殊性能	干 / 已调节	单位	Test Standard
ISO数据
粘数	120 / *	cm³/g	ISO 307, 1157, 1628

函数

典型数据

加工方法

注塑, 其它挤出成型

供货形式

粒料, 黑色

特殊性能

经热稳处理的/耐热的

特征

熔体强度, 热稳定性

耐化学试剂

通用耐化学性

应用

汽车, 电子电气

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 125 - 170 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.